Product Description
Product Description
|
Product name |
Taper lock bushing |
||
|
Material |
Steel, Cast iron, Stainless steel |
||
|
Color |
Black, Natural |
||
|
Application |
Accopanying sprocket, V-type pulley, Timing pulley, Gear ect |
||
|
Inspection |
100% |
||
>> INSTALL
1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on 1 side only).
2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.
3) Make sure bush is free in hub. Slip assembly CHINAMFG shaft and locate in the desired position.
4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)).
5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.
>>REMOVE
1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.
2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.
3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub.
Packaging & Shipping
Company Profile
ZheJiang Haorongshengye Electrical Equipment Co., Ltd.
1. Was founded in 2008
2. Our Principle:
“Credibility Supremacy, and Customer First”
3. Our Promise:
“High quality products, and Excellent Service”
4. Our Value:
“Being Honesty, Doing the Best, and Long-lasting Development”
5. Our Aim:
“Develop to be a leader in the power transmission parts industry in the world”
|
6.Our services: |
1).Competitive price |
|||
|
2).High quality products |
||||
|
3).OEM service or can customized according to your drawings |
||||
|
4).Reply your inquiry in 24 hours |
||||
|
5).Professional technical team 24 hours online service |
||||
|
6).Provide sample service |
||||
Main products
Machines
Exbihition
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO |
|---|---|
| Pulley Sizes: | SPA/Spb/Spc/Spz |
| Manufacturing Process: | Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Polishing |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Where can I find cost-effective taper bushes for agricultural machinery?
When searching for cost-effective taper bushes for agricultural machinery, there are several places where you can explore and find suitable options. Here are some suggestions:
1. Online Industrial Suppliers: Many online industrial suppliers or distributors specialize in providing a wide range of mechanical components, including taper bushes. These suppliers often offer competitive pricing and a variety of taper bush options suitable for agricultural machinery. You can search for reputable online industrial suppliers and browse their catalogs to find cost-effective taper bushes that meet your specific requirements.
2. Agricultural Machinery Dealerships: Local agricultural machinery dealerships or retailers may carry taper bushes or have connections with suppliers who offer such components. Visiting or contacting these dealerships and inquiring about cost-effective taper bushes for agricultural machinery can be a good option. They may have knowledge of affordable options or be able to provide you with contact information for suppliers who specialize in agricultural machinery components.
3. Trade Shows and Exhibitions: Attending trade shows and exhibitions related to agricultural machinery can be an excellent way to explore different suppliers and manufacturers in the industry. These events often feature a wide range of exhibitors showcasing their products, including mechanical components like taper bushes. Engaging with suppliers at these events can help you find cost-effective options and establish direct contacts with manufacturers or distributors.
4. Online Marketplaces: Online marketplaces, such as Amazon, eBay, or specialized industrial marketplaces, can offer a wide selection of taper bushes for agricultural machinery. These platforms allow you to compare prices, read customer reviews, and choose from various sellers, which can help you find cost-effective options. However, it is important to ensure that the sellers on these platforms are reputable and that the taper bushes they offer meet the required quality standards.
5. Local Machine Shops and Fabricators: Local machine shops and fabricators may be able to manufacture custom taper bushes at competitive prices. They can work with you to understand your specific requirements and produce taper bushes tailored to your agricultural machinery. Engaging with local machine shops or fabricators can provide flexibility and cost-effective solutions, especially for unique or specialized applications.
When searching for cost-effective taper bushes, it is essential to consider factors beyond just the price, such as the quality, durability, and compatibility with your agricultural machinery. Ensure that the taper bushes meet the required specifications and standards for your specific application to avoid potential performance issues or premature failures.
By exploring these avenues and considering factors such as price, quality, and compatibility, you can find cost-effective taper bushes for your agricultural machinery that meet your requirements and budget.
Can I get advice on selecting taper bushes for specific torque and speed requirements?
Yes, you can seek advice on selecting taper bushes for specific torque and speed requirements. When it comes to choosing taper bushes for a particular application, considering the torque and speed requirements is crucial to ensure the proper functioning and longevity of the power transmission system. Here are some sources where you can obtain advice on selecting taper bushes for specific torque and speed requirements:
- Manufacturer or Supplier Technical Support: Taper bush manufacturers or suppliers often provide technical support services to assist customers in selecting the appropriate taper bushes for their specific requirements. They have knowledgeable staff who can offer guidance based on the torque and speed parameters of your application. Contacting the manufacturer or supplier directly and discussing your torque and speed requirements will allow them to recommend the most suitable taper bush options for your application.
- Engineering Consultants or Specialists: Engaging with engineering consultants or specialists who have expertise in mechanical power transmission systems can provide valuable advice on taper bush selection. These professionals can analyze your torque and speed requirements, taking into account factors such as load characteristics, operating conditions, and safety factors. They can then recommend taper bushes that meet the specific demands of your application, ensuring optimal performance and reliability.
- Online Engineering Communities: There are online communities and forums where engineers, mechanical experts, and industry professionals gather to exchange knowledge and offer advice. Participating in these communities and posting specific questions regarding taper bush selection for torque and speed requirements can lead to valuable insights and recommendations from experienced individuals in the field. These platforms facilitate discussions and allow for collaboration among professionals with diverse backgrounds and expertise.
- Technical Publications and Resources: Industry publications, technical handbooks, and textbooks related to mechanical engineering and power transmission often cover topics on taper bush selection. These resources provide information on torque and speed considerations and offer guidelines for choosing the appropriate taper bushes. Consulting reputable publications authored by experts in the field can provide detailed advice and insights into the selection process.
When seeking advice on selecting taper bushes for specific torque and speed requirements, it is important to provide accurate and detailed information about your application, including the torque levels, rotational speeds, and any other relevant factors that may impact the performance of the taper bushes. This will enable the experts to make informed recommendations tailored to your specific needs.
By leveraging these sources of advice, you can ensure that you select the most appropriate taper bushes that can effectively handle the torque and speed requirements of your application, promoting efficient power transmission and minimizing the risk of premature failures or other operational issues.
What is a taper bush, and how does it work in mechanical applications?
A taper bush, also known as a taper lock bushing, is a mechanical component used to secure rotating shafts or hubs to mating equipment, such as pulleys, sprockets, or gears. It provides a reliable and secure connection that can withstand high torque and axial loads. Here’s how a taper bush works in mechanical applications:
A taper bush consists of a tapered sleeve with an external taper and a corresponding tapered bore. The external taper is designed to match the taper of the mating component, while the tapered bore fits onto the shaft or hub. The taper of the bush and the mating component create a tight interference fit when assembled.
The installation process involves sliding the taper bush onto the shaft or hub and then tightening a set of screws or bolts. As the screws or bolts are tightened, they exert radial pressure on the taper bush, causing it to expand and grip the mating component tightly. This creates a frictional connection between the taper bush, the shaft or hub, and the mating component, effectively locking them together.
The advantages of using a taper bush in mechanical applications include:
- Easy Installation: Taper bushings are relatively simple to install. They eliminate the need for complex machining or keyways on the shaft or hub, as the interference fit provides the necessary grip.
- Secure Connection: The taper lock mechanism ensures a secure and backlash-free connection between the shaft or hub and the mating component. It can withstand high torque and axial loads without slipping or loosening during operation.
- Accommodation of Different Shaft Sizes: Taper bushings are available in various sizes and tapers to accommodate different shaft diameters and mating components. This versatility allows for flexibility and interchangeability in mechanical designs.
- Easy Removal and Replacement: In case of maintenance or replacement needs, taper bushings can be easily removed by loosening the set screws or bolts. This facilitates quick disassembly and reassembly without causing damage to the shaft or hub.
- Reduced Downtime: The ease of installation and removal, combined with the secure connection provided by taper bushings, helps minimize downtime during equipment maintenance or component replacement.
Taper bushings are commonly used in a wide range of mechanical applications, including power transmission systems, conveyor systems, industrial equipment, and automotive applications. They offer a reliable and cost-effective method for connecting rotating shafts or hubs to mating components, ensuring efficient power transmission and reliable operation.
When using taper bushings, it’s important to follow the manufacturer’s guidelines for installation and tightening torque to ensure proper functionality and avoid any potential issues.
editor by CX 2024-03-13