Product Description
Product Description
Unlike typical Bearing Bushes, Taperlock Bushes make use of locking mechanisms that have several useful applications, especially in the case of mechanical applications that involve high speeds. These Bearing Bushes are usually used to secure Pulleys, Sprockets and other elements to shafts. Most Taperlock Bushes are manufactured using strong, yet inexpensive materials like cast iron. However, if you require corrosion resistance, steel and stainless steel equivalents are also available upon request. Aside from high-speed applications, Taperlock Bushes are also recommended to be used with Couplings, Sprockets, and Power Transmission elements like V Pulleys. Check out our product range for your all your mechanical and construction needs with products like Adhesives & Lubricants, Ball Bearings, V Belts, and Sprockets,. Visit our products page for Special Offers or contact us with any further enquiries.
1.Ease of installation and removal
2.Equivalent to a shrink-on fit on uniform load applications and thus eliminating the cost of a key
3.No costly reboring: full range of both metric and imperial available
4.Standard range fits up to 125mm/5″ shafts
5.Special 4-hole feature for balanced assemblies
6.Complete short reach range available, for compact lightweight assemblies
7.High grade, close CZPT iron (GG25) material
8.Spherodial Graphite (S.G.) iron construction on some sizes to give increase maximum bores
Detailed Photos
Product Parameters
Packaging & Shipping
| Package | Standard suitable package / Pallet or container. Polybag inside export carton outside, blister and Tape and reel package available. If customers have specific requirements for the packaging, we will gladly accommodate. |
| Shipping |
10-20working days ofter payment receipt comfirmed (based on actual quantity). Professional goods shipping forward. |
Company Profile
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than 70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in time.
-Strick quality control are apply in the whole production.
we have incoming inspection,process inspection and final production inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export. MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from worldwide customers in international sales.
FAQ
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit. To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
Advantages of Taper Bushes
In 1 embodiment, bush 1 has additional material removed from its outer surface so that the longitudinal slit is widened locally toward its outer surface 15. This widened longitudinal slit 11 facilitates state of balance. Moreover, this embodiment also provides metal removals from the surrounding taper-bored hub. Further, the bush includes a slit that is widened locally to the outer surface 15 of the bush.
Conical clamping bushes
Conical clamping bushes are used to fasten shaft cartridges. They can be manufactured in different dimensional variants to fit different types of shafts. They do not weaken the shaft and make assembly and positioning easier. Conical clamping bushes have a large range of dimensional variants. They can be pre-drilled for most common shaft diameters and can be fitted in a shorter time than shaft nuts and feather keys.
Conical clamping bushes, also known as taper ‘taperlock’ ‘tapers’, have a conical outer surface and a cylindrical inner bore. Their cylindrical shape makes it possible to quickly mount and remove pulleys without any additional machining. They are also made with DIN 6885/1 keyways and are interchangeable with similar commercial types. Conical clamping bushes are widely used in a variety of applications, such as conveyor belts and chain drives.
Clamping bushes are available for every type of application, from simple screwdrivers to huge hydraulic cylinders. The choice of which 1 to use depends on the torque required in the application. Self-centring clamping bushes are ideal for applications that require high torque. Listed below are 94 manufacturers and suppliers of conical clamping bushes. You can also find other products and accessories for your application. If you are looking for a cone-shaped clamping’shaft’, you can contact companies that specialise in this product.
When choosing a conical clamping hub, it is important to understand the application. This is vital for finding a matched part for the job. For example, conical clamping hubs come in 2 different styles. While both have some similarities, they differ in their installation processes. A conical clamping hub is often more difficult to install, but is the most suitable choice for many applications. In some cases, the bolts are difficult to access.
Taper lock bushes
In mechanical joining, taper lock bushes are commonly used for shafts. They incorporate thread and key-way that are machined to ISO standards. A QTL tapered bush fits over the tapered hub of a main component. It is used in applications where mechanical flexibility is crucial, such as gear drives and hydraulic systems. This article will explain the advantages of using these bushes and how they can benefit your application. Also, find out what these bushes are.
Taper Lock Bushes are a type of bushing that can be used in a wide variety of applications. They can be used on a wide range of pulleys and sprockets and are available in metric and inch sizes. They are widely used in textile industries, solvent plants, spinning units, and papermills. Taper bushes can be easily assembled or disassembled by using a hexagonal key, so they’re an excellent choice for these applications.
A key-way or thread in a taper lock bush ensures a tight, secure fit on the shaft. This is especially important when a bush is made of metal. Steel taper locks are the most durable, but they’re not as flexible as metal ones. They can be ordered in imperial or metric sizes, and they are delivered in a neat manner. However, you should carefully consider the installation procedure to avoid damages.
Before you install a Taper-Lock bushing, check the size of your existing bearings. This will help you determine if the bushing will fit your needs. The size is determined by 4 digits, with the first 2 digits representing the maximum bore size and the second 2 digits determining its length. A 1.5″ diameter bore would be a 1-1/2″ bushing, for example. Stainless steel bushings are also available on a quote basis.
Widening longitudinal slits in a bush
The present invention relates to the widening of a longitudinal slit of a taper bush in 1 embodiment. The longitudinal slit of a taper bush can be widened locally in 1 or more locations to create a state of balance. The metal removals may come from the surrounding taper-bored hub. Another embodiment involves the profiling of a bush, in which the longitudinal slit is widened locally in 1 direction toward the outer surface 15.
The taper bush system uses a plurality of screws and bolts parallel to the axis of the hub. The slits help to secure the element onto the shaft. The taper bushes are also useful for balancing the mass imbalance of the mating hub and the bush. However, the current invention overcomes these problems by introducing wider longitudinal slits in the taper bushes.
Moreover, the widening of longitudinal slits of a taper bush is possible and affordable in high volume manufacturing processes. The technique can be carried out in 3 different ways: local, shallow, or deep. In shallow profiles, the slit can be enlarged by drilling a hole in the region of the longitudinal slit, while a symmetrically positioned hole can be created in the fixed portion.
Common applications
Taper bushes are a popular choice in many industries and are used for a variety of different purposes. They are a simple and inexpensive way to adapt pulleys to a variety of shaft sizes without machining keyways or bores. The taper part of the component is computer etched to identify its size. High-10sile screws drive the taper part of the component into the hub, allowing the component to be fastened securely and transmit high torque. This is particularly important for high torque applications because they allow sprockets to be installed correctly and easily aligned.
These taper bushes are designed for use in hub and bush assemblies to secure machine elements to cylindrical shafts. Their longitudinal split allows them to contract and expand to accommodate the changing shape of machine elements. They are often used for gearing and induction motors. They can also be used for balancing mass imbalances between a machine element and its mating hub. If you’re looking for a reliable solution to your gearbox’s torque woes, taper bushes can be a good choice.
In addition to bearings, a taper-lock clamping nut allows hubs to be accurately axially centred. This type of nut offers better centring than keyways, but they must be ordered separately. When installing a taper-lock nut, make sure to use a corresponding taper-lock nut and lock bush. You should always measure the length-through-bore before you install a taper-lock nut.
